IoT Tools and Platforms
This category could cover topics such as development tools, platforms, and hardware for building IoT solutions, including guides on using tools like Arduino, Raspberry...
IoT Tools and Platforms articles · Page 2
Designing Thread Border Router Topology for Home Assistant
A Thread Border Router topology for Home Assistant should start with one manageable preferred Thread network, known credentials, reachable Matter Server, IPv6/mDNS, an...
Read article
Why Matter over Thread Fails Most Often at Commissioning in Home Assistant
Matter over Thread failures in Home Assistant are usually not caused by a broken device. They often come from a broken path between the phone, Matter Server, Thread Bo...
Read article
Tuya Webhook vs Pulsar for IoT Event Synchronization
Tuya Webhook vs Pulsar is not only an API choice. It is a trade-off across event reliability, replay, fan-out, consumer scaling, and operational complexity for IoT eve...
Read article
Choosing a Serial and Modbus Debugging Toolchain: NetAssist, CoolTerm, and Modbus Poll
NetAssist, CoolTerm, and Modbus Poll should not be chosen by popularity. Use CoolTerm for raw serial visibility, NetAssist-style tools for TCP/UDP and packet checks, a...
Read article
FUXA, Node-RED, and Modbus as an Open-Source SCADA Stack
FUXA, Node-RED, and Modbus can form a practical open-source SCADA prototype stack for HMI screens, data collection, and lightweight automation, but production SCADA st...
Read article
Dify Workflow Template Patterns for Smart Home and IoT Automation
Dify Workflow is useful for reusable smart home and IoT automation templates, but it should not replace the device control plane. This guide covers event summaries, al...
Read article
n8n + Tuya for IoT Automation: Workflow, Events, and Commands
n8n can connect Tuya device events to business workflows, alerts, tickets, and AI summaries, but it should not be the real-time IoT control plane. This guide explains ...
Read article
Tuya Cloud API Production Pitfalls: Auth, Rate Limits, Events, and Data Consistency
Tuya Cloud API production issues usually come from auth, token refresh, rate limits, event synchronization, and data consistency, not from basic API calls. This guide ...
Read article
ESP32-S3 Voice Pipeline Design with I2S, PDM, and ESPHome Voice Assistant
ESP32-S3 voice satellites for Home Assistant and ESPHome are limited by the full audio pipeline: I2S/PDM microphones, buffers, Wi-Fi jitter, Assist pipeline latency, a...
Read article
ZHA vs Zigbee2MQTT vs Matter in Home Assistant: Which Integration Path Should You Choose?
ZHA, Zigbee2MQTT, and Matter solve different problems in Home Assistant. This guide compares device compatibility, maintenance cost, debugging depth, network boundarie...
Read article
Debugging Long-Uptime ESPHome Devices on ESP32
ESPHome devices that fail after days or weeks usually suffer from accumulated system effects: heap pressure, fragmentation, Wi-Fi instability, blocking components, sen...
Read article
Building a Multi-I2C Sensor Gateway with ESP32 and ESPHome
A reliable ESP32 and ESPHome multi-I2C sensor gateway is not just about scanning sensor addresses. It needs bus isolation, warm-up windows, deep sleep trade-offs, powe...
Read articleEvaluating a IoT Tools and Platforms project?
Share the device, data flow, network condition, target users, and business system boundaries. We can help you decide what to build first.